Shadow SW10087 Electronic Boost Controller
-
Electronic Boost Controller
Two status of pressure control: create your personal settings and save them in device.
- Rapid switching: press only one button and switch the setting immediately.
- Compatible to both types of turbo charger: actuator and waste gate.
- Pressure limitation: maximum to 200KPa (36PSI).
- Alerting: automatically detect over-pressure to prevent damage to turbo charger and engine. Once the air charging exceeds the setup alertness, EBT will wake up the buzzer and flash the light.
- Resume to original setting: setting will go back to the original by turning off the devise or the engine.
900 AED (inc. VAT)
Usage
WOLVER AntiFreeze WG12 Concentrate is excellently suitable for motors being made of cast iron, aluminium or of a combination of both the metals and at cooling systems being made of aluminium or copper alloyage.
WOLVER AntiFreeze WG12 Concentrate is especially recommended for light run motors where a special aluminium protection at higher temperatures is required.
Recommended working concentration 50 % WOLVER AntiFreeze WG12 Concentrate and 50% water, radiator protection up to -37 °C can be achieved. Antifreeze protection down to -68°C is possible with a maximum of 69% WOLVER AntiFreeze WG12 Concentrate and 31% water.
- Extreme wear protection at all operating conditions
- Excellent viscosity-temperature behaviour
- Minimum loss through friction, more power for the engine
- Very high cleaning capability
- Low volatilization loss
- High oxidation and temperature stability
- Maximum shear stability
- Very good operating reliability
- Excellent cold starting properties – rapid supply of all points of lubrication
- Optimal high temperature viscosity
- Constant operating properties
- Maximum performance results
- Reduced fuel consumption
- Optimal engine cleanliness
- Low oil consumption
- All-year-round operation
- guarantees optimum combustion
- prevents corrosion in the fuel system
- protects the catalytic converter from clogging with soot
- cleans the intake tract, intake valves and combustion chamber
- guarantees low fuel consumption with long-lasting effect
- Optimum long-term protection for all engines
- Reduces fuel comsumption and exhaust emission
- Excellent cold starting properties – rapid supply of all points of lubrication
- Very good operating reliability
- Optimal engine cleanliness
- Low oil consumption
- High margin of performance and high product stability, also at extended oil change intervals
- All-year operation
- Optimal oil pressure
- High flow filter designed to fit 3 inch, 3 1/2 inch and 4 inch tubes
- Quality materials used throughout including oiled, washable synthetic media, urethane, and steel mesh
- Factory pre-oiled and ready to use
- Includes adapter rings
- White colored filter media
Application
Wolver Antifreeze & Coolant WG11 Concentrate should be mixed before pouring into the cooling circuit with water at a concentration of 33 to max. 60 vol% can be used. Applying a 50/50 ratio for the mixture of water and Wolver Antifreeze & Coolant WG11 Concentrate is recommended.
Protection against the cold / antifreeze
50 vol% in water -38 ° C
33 vol% in water -18 ° C
- High-performance and normal four-stroke petrol engines
- with multivalve technology
- with turbo charging
- with catalyst technology
- Passenger car diesel engines
- with turbo charging
- Suction diesel
- CDI- HDI- and TDI-motors
- with CDi-technology
- Direct-injection
- with catalyst technology