– White powder coat finish
– Improves tyre and ball joint wear
– Polyurethane bushings for long life
– Chromed hardened 20 mm. piston rod
– Improves control and handling for oversize tires
– Available in single, dual and OE mounts for most applications

• Highest flow in-tank brushed fuel pump offering from TI Automotive
• Featuring award winning DCSS technology and E85 Compatible
• Capable of supporting 900+HP at 60PSI naturally aspirated applications
• Internal check valve — prevent fuel system pressure bleed down — prevent extended cranks
• High pressure relief setting — support supercharger and turbo applications

Super Cool Can; 7.75 in. x 7.75 in. x 8 in.; 3/8 in. NPT Inlet/Outlet; Polyethylene Shell; Aluminum; Steel Straps;

• Tire Deflator comes with a Bourdon-tube gauge that gives you speedy and accurate pressure reading
•  The gauge is made of superior quality
• corrosion-resistant bronze, and its accuracy is not affected by changes in temperature, humidity or altitude.

• 0.6mm Center Electrode
  Enhanced Ignitability
  Trivalent Metal Plating
  Copper Core Aids in Heat Removal

Type:
Directly see HUD
Placement:
OBD
Display Type:
LCD screen
Screen Type:
LCD
Resolution:
320*480
Function:
Clock, water temperature, Build-in GPS, Voltage Alarm, Fuel Consumption, Fatigue Driving Alarm, Driving Time, Engine RPM, Speed Monitoring, Driving Distance, digital meter, Ambient Alarm light, 9 kinds different display interface, 2 kinds install way, OBD2+GPS 2 system, smooth display, without delay
Warranty:
5 year
Place of Origin:
China
Brand Name:
Acclope
Model Number:
AP-6
Product name:
Multi-function OBD2 GPS HUD
Model number:
AP-6
Brand:
Acclope
System:
OBD2 GPS
Display:
more than 100 kinds car datas
Feature 1:
Alarm Ambient light
Feature 2:
9 kinds interface
Feature 3:
Bracket can be adjusted
Install:
Connect with OBD cable
Work:
all cars

NIS TB48 INLINE-6 100.5 MM 060″ MLS 5-LAYER HEAD GASKET

ORAM High Performance Off Road Shock Absorbers are heavy-duty single-tube high pressure gas filled shock absorbers. ORAM Step 3 dampers are manufactured individually for each customer.

Suitable for all 2- and 4-cycle gasoline engines. Tested safe with catalytic converters and turbochargers. For adding directly to the fuel tank. Can contents are sufficient for up to 70 l fuel. Perfect for constant use for any kind of refueling.

• This highly modern fuel additive was specially developed to noticeably improve acceleration and throttle response under partial load.
• Used as an additive in the fuel of all 2-stroke and 4-stroke gasoline engines, especially for motor vehicle engines. Also can be used in two-wheeled vehicles. For the improvement of vehicle acceleration and smooth operation.
• Used as an additive in the fuel of all 2-stroke and 4-stroke gasoline engines, especially for motor vehicle engines. Also can be used in two-wheeled vehicles. For the improvement of vehicle acceleration and smooth operation.

• Oil-Free, Pro DRY S 3-Layer Progressive Porosity Synthetic Media for Maximum Convenience
• 100% Polyurethane Frame On All Sides For Extra Long Filter Life
• Washable and Reusable for Multiple Cleaning Cycles
• 25mm Deep Rounded Open Pleats
• Progressive Bump Seal Design for a Perfect Fit

• Metal top for Secure Fit on Factory Housing

WOLVER HighTec SAE 0W-20 is а synthetic, low-friction, fuel-economy engine oil created for modern engines of passenger cars, with and without turbocharging and direct injection. Minimizes friction, wear, and fuel consumption, and is suitable for extended oil drain intervals according to manufacturer’s manual. WOLVER HighTec SAE 0W-20 ensures compliance with the viscosity grade oil even during long-duration over the entire change interval. The excellent cold start performance ensures optimum lubrication during start-up, offers a significant fuel-saving potential.

Reduces fuel consumption and exhaust emission

• Formulation for less fuel consumption and Low Ash

• Excellent cold start behaviour – fast supply of all lubrication points, especially of the hydraulic valve tappet

• Stable oil pressure

• Perfect and long lasting engine cleanliness

• Prevents motor from incrustation

• High performance reserves and high product stability, even at longest oil change interval

• All-year operation

Reduces fuel consumption and exhaust emission

• Formulation for less fuel consumption and Low Ash

• Excellent cold start behaviour – fast supply of all lubrication points, especially of the hydraulic valve tappet

• Stable oil pressure

• Perfect and long lasting engine cleanliness

• Prevents motor from incrustation

• High performance reserves and high product stability, even at longest oil change interval

• All-year operation

AEM’s 30-0306 X-Series -30in/Hg~35PSI / -1~2.5BAR Digital Boost Display gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate boost pressure readouts up to 35 PSI or 2.5 BAR in their high performance vehicle.

• Withstands 1800 degrees Fahrenheit direct heat and 2500-degree intermittent heat
• Promotes increased flow for improved performance; reduces temperature & vibration breakdown
• High resistance to abrasions, oil spills, temperatures and vibration breakdown
• International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.