Usage
WOLVER AntiFreeze WG12 Concentrate is excellently suitable for motors being made of cast iron, aluminium or of a combination of both the metals and at cooling systems being made of aluminium or copper alloyage.
WOLVER AntiFreeze WG12 Concentrate is especially recommended for light run motors where a special aluminium protection at higher temperatures is required.
Recommended working concentration 50 % WOLVER AntiFreeze WG12 Concentrate and 50% water, radiator protection up to -37 °C can be achieved. Antifreeze protection down to -68°C is possible with a maximum of 69% WOLVER AntiFreeze WG12 Concentrate and 31% water.
- High flow filter designed to fit 3 inch, 3 1/2 inch and 4 inch tubes (included adapter rings)
- Quality materials used throughout including washable, oiled synthetic media, urethane, and steel mesh
- Factory pre-oiled and ready to use
- Red colored filter media
- High-performance and normal four-stroke petrol engines
- with multivalve technology
- with turbo charging
- with catalyst technology
- Passenger car diesel engines
- with turbo charging
- Suction diesel
- CDI- HDI- and TDI-motors
- with CDi-technology
- Direct-injection
- with catalyst technology
Huge 3-Layer Performance Air Filter:
The Momentum GT intake is designed around an oil-free, large 9″ oval 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. The air filter is wrapped in reinforced metal providing maximum strength to prevent filter collapse.
Unique One-Piece High Quality Housing W/ Sight Window:
A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene.
- Extreme wear protection
- Excellent viscosity-temperature behaviour
- Minimum loss through friction, more power for the engine
- Very high cleaning capability
- Low volatilization loss
- High oxidation and temperature stability
- Maximum shear stability
-
- outstanding engine cleanliness
- excellent high and low temperature behavior
- excellent wear protection
- outstanding lubrication reliability
- high shear stability
- miscible with all commercially available motor oils
- optimum stability to aging
- friction and wear reducing
- instant lubrication after cold start
- tested for turbochargers and catalytic converters
Application
Wolver Antifreeze & Coolant WG11 Concentrate should be mixed before pouring into the cooling circuit with water at a concentration of 33 to max. 60 vol% can be used. Applying a 50/50 ratio for the mixture of water and Wolver Antifreeze & Coolant WG11 Concentrate is recommended.
Protection against the cold / antifreeze
50 vol% in water -38 ° C
33 vol% in water -18 ° C
- High wear protection
- Excellent viscosity-temperature behaviour
- Minimal frictional loss
- High cleaning capability
- High oxidation and temperature stability
- Prevents black sludge formation